A ceiling fan and a designer light — in any bulb socket
Screw it into a standard socket and you've got quiet airflow and a dimmable, three-tone light. No wiring. No electrician. About 30 seconds.
- Fits any standard E27 screw socket — no rewiring
- Quiet fan, 3 speeds + a full room light in one
- 3 light tones (warm to white) with step-free dimming
- Remote with 1 / 2 / 4-hour timer — bulb included
Some rooms only have a light socket — and a lot to ask of it
The bedroom runs warm. The light is dim, or the wrong colour after dark. And fitting a proper ceiling fan means an electrician, a day off, and — if you rent — a conversation with the landlord you'd rather not have. So the room stays stuffy and flatly lit, and you put up with it.
One socket. A fan and a light. Thirty seconds.
It looks like a light — it does the job of a fan and a light. The clever part is the fitting: it screws in exactly where your bulb goes.
Twist out your old bulb
Turn the light off and unscrew the bulb you already have. That's the whole "installation" tool kit — your hand.
Screw the Purry fan light in
It threads into the same standard E27 socket. No wires to touch, nothing to drill, nothing to call anyone about.
Switch on & take the remote
Power back on. From the sofa: fan up or down, light warm or white, brighter or softer, timer if you like. Done.
Real air, and a light you'll actually want on
This isn't a novelty. It's a genuine fan to move the air on warm nights — three speeds, gentle to strong — under a soft, dimmable light that shifts from warm-white wind-down to bright cool white when you need to see properly.
All of it from the little remote, without leaving the bed or the sofa.
Comfort that installs itself
Real airflow, three speeds
A genuine fan to move the air on warm nights — gentle to strong, all from the remote.
Three light tones
Warm for winding down, bright white to actually see by. Dim it anywhere in between.
No electrician, ever
Screws into the socket you already have. Renter-friendly — take it with you when you move.
Remote + sleep timer
Run the light and fan from across the room, and set a 1, 2 or 4-hour timer to drift off.
Three light tones, one tap away
Shift the whole room's feeling from the remote — no bulb-swapping, no apps.
What you're getting
Any room with a ceiling bulb socket
Against the alternatives
| Purry Fan Light | Fitted ceiling fan | Separate fan + lamp | |
|---|---|---|---|
| Fan and light in one | Yes | Usually not | No — two things |
| Install time | ~30 seconds | Electrician visit | Plug in two devices |
| Needs an electrician | No | Yes | No |
| Renter-friendly | Yes — reversible | Rarely allowed | Yes |
| Floor / table space used | None | None | Takes up space |
The questions we get most
Will it fit my socket?
If your ceiling takes a standard screw-in (E27) bulb — the most common fitting in the UK — it fits. Bayonet-only fittings need a simple low-cost adapter.
Is it bright enough?
It's a full room light, not a night light — choose the 40W for the brightest output, and dim it down whenever you want softer light.
Is the fan loud?
It's designed to run quietly in a bedroom on the lower speeds. Turn it up when you want more air, down when you want calm.
What's in the box?
The fan light (with bulb) and the remote. Screw it in, drop batteries in the remote, and you're set.
What owners are saying
"Swapped it for the spare-room bulb in about a minute. It's a proper light and a real breeze — the standing fan's gone in the loft."
"We rent, so a ceiling fan was never happening. This just screws in. The warm setting of an evening is gorgeous and the remote lives on the sofa arm now."
"Bought one for the nursery — so quiet on the low speed. Ended up ordering two more for the bedrooms."
Purry Socket Fan Light
Fan and designer light in one. Fits any standard bulb socket. Bulb and remote included.
Add to Cart · £39.95Frequently asked
Do I need any tools or wiring?
No. If you can change a light bulb, you can fit this. It screws into the same socket — nothing to wire, drill, or mount.
What size socket does it need?
A standard E27 screw fitting (the common UK/EU screw bulb). For a bayonet fitting, a low-cost E27 adapter sorts it.
Can I control the light and fan separately?
Yes — the included remote runs the fan speed and the light tone/brightness independently, plus a 1/2/4-hour timer.
Is it OK for a rented home?
Yes. It's completely reversible — unscrew it and put your old bulb back when you move, and take it with you.
What's included, and what about returns?
You get the fan light (bulb included) and the remote. If it's not right for your room, you're covered by 30-day returns.